Hello, Sign In

Transistor Pure Red Version and HiFi EAVI Metal Phase 4A | KFC Toys

Transistor Pure Red Version and HiFi EAVI Metal Phase 4A | KFC Toys


FREE Shipping

  • Free shipping is available for domestic shipments only and only offered on the lowest cost shipping method. This amount is then subtracted on any higher cost shipping methods.
  • Free shipping is available on each domestic vintage order $150 or more, with orders of vintage and non-vintage orders, each must be $150 or more or will not qualify for free shipping
  • International shipping is also reduced on all orders $150 or more, but not free.
  • No code required, free shipping and reduced international shipping is automatically calculated in checkout!

Buy This Item and Earn 95 Geek Points

Verified authentic vintage product by the Toygeek vintage department.  Ships from the Toygeek Vintage Department.

Product Specs

Toygeek Vintage Toygeek Vintage Department
Manufacturer Kfc Keiths Fantasy Club
Size 9.4 inches
Scale Masterpiece Scale
Series Eavi Metal
  • Loose, 100% Complete
  • All Parts and Accessories Included
  • Instruction Manual Included
Alt Mode Cassette Player

In Stock and Ready to Ship


FREE Shipping


Related Products

Product Description


Transistor Pure Red Version and HiFi EAVI Metal Phase 4A | KFC Toys


Transistor Pure Red Version and HiFi by KFC Toys is a Masterpiece Scale scaled 3rd party figure that transforms from a Cassette Player to robot and back.    Transistor Pure Red Version and HiFi figure stands 9.4 inches tall in robot mode and scales to other figures from KFC Toys and to other Masterpiece Scale scaled figures already in your collection. 


Keith's Fantasy Club's figures include many must have items for the discerning 3rd Party collector.  KFC Toys EAVI METAL line features high quality construction using ABS plastic, rubber for the tires, die-cast parts.  They make use of modern design techniques, and precision engineering for all figures in their EAVI Metal 3rd party figure line.


Start your Keiths Fantasy Club Collection today with Kingzilla and Komodus.   Add this highly sought after piece to your collection today at Toygeek, your source for 3rd Party collectible transforming figures.

Product Features

  • Toy Series: Eavi Metal
  • Toy Size: 9.4 inches
  • Scale: Masterpiece Scale
  • Alt Mode:Cassette Player
  • Loose, 100% Complete
  • All Parts and Accessories Included
  • Instruction Manual Included

Packaging Contents

  • 1 x Transistor Figure
  • 1 x Cartoon Head
  • 1 x Toy Head
  • 2 x Buster Guns
  • 2 x Golden Trumpets
  • 1 x Non-Transparent Blue Eye Replacement
  • 1 x PVC Bio Card
  • 1 x HiFi Cassette Figurin
  • 2 x Small Guns for HiFi
  • 1 x Cassette Clear Box
  • 1 x Comic Book/Manual

WARNING: All items sold by Toygeek are intended for adult collectors. Items may have small parts or other elements not suitable for children under 16 years old.

KFC Toys Transistor Pure Red Version and HiFi EAVI Metal Phase 4A in Cassette Player alt mode!

KFC Toys Transistor Pure Red Version and HiFi EAVI Metal Phase 4A is fully articulated!

KFC Toys Transistor Pure Red Version and HiFi EAVI Metal Phase 4A includes a wide array of accessories!

Customer Reviews


Customer Reviews

3 out of 5 stars overall


Review this Product

Share your thoughts with other customers


December 31, 2021

The left leg was assembled incorrectly

Brownsburg, IN

November 05, 2021

It's a pretty good Blaster.

Like with a lot of MP, the transformation is insane and flimsy until you finally get there, then it's sturdy. That doesn't really bother me because the robot mode is great and usually will stay in that mode. Clever to put Eject's hand holds where the tape holes are in transformation. I got this version because not metal/chrome. Don't appear to be any defects.

Watertown, NY

July 13, 2020

It looks nice but the lack of any metal parts and increasing price leaves me baffled

Summersville, WV

July 09, 2020

Loose neck pins, ratchets in knees felt weak foot pins so loose fig couldnt stand sent back for refund.

Sanford, FL

June 03, 2019

If you want a Masterpiece Blaster, this is pretty much your only option. That said, he is pretty well built. The tapes don't pop out like Soundwave's when he ejects them, but he can hold 3 tapes like MP Soundwave. The hands are a little of a struggle and the tab for his guns do not fit well at all. Overall, a good buy.

Newington, CT

March 20, 2019

Pluses- Red plastic looks good. No paint flaking to worry about! Great G1 look. Very poseable. Good accessories.

Minuses- Loose shoulder joints. Doesn't quite feel or look in the Masterpiece league due to the quality of all plastic parts. Some parts feels thin, flimsy when transforming.

Worst- Price point is way to high.

Alabaster, Alabama

January 25, 2019

He looks really good in robot mode and ok in alt mode. not as hefty as expected.

that being said, the plastic is thin and cheap. I was able to get him into alt mode, then when i tried to go back to robot mode, his entire right arm (including shoulder) came off. One tiny screw/pin holding entire shoulder and arm on thin plastic. Expected better construction and materials. However, I was able to reset arm and shoulder using longer screw since the plastic pin was no longer there. Even with the broken arm, he gets 3 stars because he does look very good in robot mode next to Soundwave but could use stronger points of attatchment for shoulders.

Holywell, Flintshire

January 09, 2019

This is kind of a shame, there's so much about this figure that is great. Transformation is good, the likeness is super-cool, as are the accessories.

Buuuuut, I found the plastic of poor quality and the construction flimsy - to the point where, unfortunately, my Transistor's shoulder broke.
There is a sliding pin / screw that connects the shoulder to the chest piece - that pin breaks very easily. Heartbreaking and expensive. Great display piece, but I'd expect stronger construction and better materials at this price point.

Eureka springs, AR

November 30, 2018

Not anywhere near as good as others have stated. Yes, my WiFi hip joints were horribly loose. Guess what¿ With a quarter turn back and then a half turn forward on the screw he tightened right up.
The same with Transistor. I adjusted every screw I could reach and he is just fine.
People need to understand that constant temperature changes in a house will cause these tiny screws to loosen. It comes from the expansion and shrinkage due to heat and cold. Tighten things up just a tad before complaining.

Fpo, AP

October 17, 2018

First, I echo kevaegis - everything he mentioned in his review was exactly the same on the Transistor and Wifi I received. Something must have changed with reissue. The molds still looks great but they both feel cheap in hand. I truly wish I read his review before this purchase.

This is my most disappointing purchase. The Transistor and Wi-Fi I received was nothing like the ones I have seen in reviews. I honestly think the original versions released back in 1985 / 1986 are better made, and that alone should say something. The plastic used along the QC issues are really sub par and make them feel cheap.

Wifi's joints are horribly loose and he has a difficult time holding his weapons (either the hands are too small, or the pegs are too big) I have never been a fan of the KFC tapes, but Rewind and Eject both looked really good, which is their main purpose in my collection. However, getting WiFi into a pose that he can hold is nigh impossible due to the loose joints. Again, it’s not because of the mold, it is due to the plastic quality and joint tolerances.

I always thought Keith and KFC got a bad rap and a lot of flak. Mostly because I am a huge fan of the X-Transbots line his sister company, I own 4 of them and think they are all awesome (Toro, Klaatu, Crackup and Pean) However, now that I actually own a - no kidding, - KFC “Masterpiece” I can clearly see where he earned some of that reputation. The plastic quality and joint tolerances are so bad on Wifi that I almost tossed it in the trash. I know it is only a matter of time before Takara releases their version and I am looking forward to it.

On a semi positive note - they both really look good, so if your looking for something to put on a shelf (once posed) you will be fine. If you are going to manipulate them in any way be weary. If you need a Blaster to scratch that itch and you have $150.00 he will do - until a better one comes along.

Coquitlam, BC

October 08, 2018

I do all necessary research before purchasing third party transformers, but this one was an anomaly because of the high praise from reviewers.

HiFi is loose in almost all of his ball joints, he barely stands as there is 0 friction in his right hip joint. His 2 gold pistols do not fit in his hands, and after trying to jam one into the fist without success, attempting to pull out whatever was already stuck in his fist began to twist away like soft candy cane.

The plastic on Transistor is of equal poor quality, though the bot itself hasn't experienced any breakages, yet. Attempting to store the two rifles onto the blaster mode however, caused the longer part of the sights on both rifles to bend away without even first showing stress marks. The plastic is so weak that any structure that is elongated, trimmed thinner, and without any screw/pin support can easily break.

The robot form stands waveringly, even with the heel spurs out, there is no real heft to the figure and the center of gravity is not aligned with the lower limbs. The alt mode contains panels that don't fit together tightly enough, as well as panels on swivels that don't have any support in design so upon being handled they easily fold back and away from the hollow, unstable structure. In the end, you get a simple box, and it's not even a good box.

This was my first try with KFC. I will not invest in their products in the future. It's a shame; the art and the production altogether were impressive, but the final product most definitely leaves much to be desired.

Spartanburg, SC

September 12, 2018

I have been wanting a MP scale Blaster. This was the only one that seemed to fit the bill. I’ve been burned by KFC Toys in the past, and I was very hesitant to try Transistor. After reading the reviews, I decided to try.
There was a defective part. One of his back panels was identical on both sides instead of being symmetrical, so it wouldn’t turn properly. HiFi seemed ok, some minor paint issues. I planned to ship him back and get him replaced.
Then I tried to transform him. His foot came clean off at the ankle swivel joint. It was connected by a small screw with NO SCREWDRIVER GROOVES. Wth? I fiddled with it for several minutes and gave up. Just got a refund. I was very disappointed. He looks nice, but two issues right out of the box? Gotta say no. I’ll just have to wait. No more KFC for me.

Brooklyn, NY

July 20, 2017

Very cool figure. I'm happy I finally decided to buy him. Waiting on hasbro or Takara is luke pulling teeth, it hurts. I dnt day more than what has already been said. This is a master with having on your self.

Rahway, NJ

September 23, 2016

After absorbing all the reviews I finally decided to buy this as MY MP Blaster.

This version is the (non metallic red painted) red plastic and no die cast metal version. So paint chipping, flaking and disintegration is virtually non existent...

The box is a wonderful window box which is overly deep for the contents. And the inside artwork is nicer than the front of the box art. But the window box is striking as you see a fully upgraded Mugen as the "new" Transistor (w mini pal Tapebot).

The main figure is superbly painted. The silver is nearly immaculate and there are so many molded details (even on his back, which gets covered up in bot mode), it is a wonder to behold. The inside leg painted details are refreshingly nice as well.

You can swap bot heads from white G1 anime to (a mix) comic head. I prefer the silver head as it matches the rest of the expertly panted bot mode.

My figure is VERY softly articulated. Over 80 percent of all Transistors joints are flaccidly soft. The inside hip ratchets are strong but I will have to screw tighten one as its a tad wobbly. Arms are very soft but feet are strong, which is a plus. Standing is no problem.

Mini Tapebot is amazing. So tiny and tight. Very well painted, too. I have concerns over plastic cracks on the most delicate pieces with screws drilled into them, but so far so good. Just be gentle with the little guy...

I want to give 5 stars for the amazing effort, transformation and impeccable paint apps. But with the floppy joints I have to kick it down a star.

TY to KFC. Keep it up. Tighter joints on figures over a hundred bucks, please...

Atlanta, GA

August 09, 2016

My first time trying a kfc toy and I was very impressed. I got the pure red version which looks just like the g1 cartoon come to life. some say it is a panel former and it is but it is a smart way to transform. accessories are A+ and the only thing I wish it had a little more heft to it

Smyrna, GA

July 20, 2016

I really wanted to like this figure a lot. He looks like he stepped straight out of the G1 cartoon and scales well with my Masterpiece collection. However, QC stinks. His right arm won't hold a pose and neither will his head. They are both very loose. I think this is unacceptable for a $150 collectible.

Royal oak, MI

May 28, 2016

You know that feel when a figure's hinges and tabs have that 'just right' snugness to them? Transistor has that all over. I'm so glad I waited for the red plastic version because it just feels fantastic. Plus he looks more like my G1 toy (and stands just about the same height!).

Any problems I have with this are minor. A coupla bits of plastic flash. The heads are a bit tricky to swap out due to the neck piece clicking in so well (though that means no wobble-neck, which is good). Hi-Fi's extra heads are unpainted on the back so they're a bit useless for tape mode. And his golden guns look good but fit in his mitts so tight I think I'll just leave them in the box for now. And his damn-near-microscopic chest flaps feel potentially-breakable, but you barely notice if you leave them out anyway. Same for the stunningly-ultraknuckled hands on Transistor: if you're terrified of trying to shove them in or pry them out for transformation, just DON'T! They're perfectly hidden anyway! Finally, a transformation where I don't have to do the lift-the-flap-rotate-the-hands-in thing!!

Boombox mode looks stellar from the front and sides, and who gives a slag if there's gaps in the back? Plug 'em with the guns and you're good. Robot mode is super-well proportioned, has all the articulation I could ask for, and just generally makes me happy to look at. Plus, I love the thoughtful touch of giving us the choice of painted eyes or light-piping for his cartoon head. Aww. If there were problems with this toy in its early releases, I think they're all well-fixed now. Bravo, KFC! (If only DAI Stack was this good...)

Columbus, OH

January 26, 2016

I received this figure over the weekend and I have to say that I was really impressed with the quality and the level of detail this figure has to offer.
I also held off from the metallic version due to numerous reports of paint chipping and I definitely feel like a made the right choice!
transistor stands about the height of MP 10 and has an extensive amount of paint detailing. The molded red plastic is nice to the touch. Since there is no diecast that IU can perceive, the figure is extremely light, I would call this the Only drawback. (Personally the articulated hands and alt mode weapons storage more than makes up for it.
If you are a fan of the character, this toy is a definite must have!

Milwaukee, WI

January 22, 2016

Held off on the metallic version, and I am glad that I did! This version is beautiful in the classic red plastic coloration. I really wanted a toy accurate version of Blaster (silver buttons!) and KFC sure delivered.
No QC issues or loose joints, an all around satisfying figure.
Also, the fixes to his front hip skirts and Hi-fi's improvements are also greatly appreciated.


Subscribe to our newsletter for tons of awesomeness on everything Toygeek! Be the first in the know about our Huge Sales, New Preorders and the Hottest Instock items.

Connect with us Follow Toygeek on Social!